Recording An Ecg From The Patient Module - HP Pagewriter XLi M1700A Operating Manual

Recording
an
ECG
To start an
ECG
from the patient module:
From
the
patient
H
To record an Auto
ECG.
~ u t s must appear on $Re
Module
,
cardiograph's main display over the soft key on
the cardiograph.
To record a Manual
EECG,
Manual a r on the
cardiograph's main display over the soft key on
the cardiograph.
1. Turn on t h e power on the cardiograph.
2. Apply electrodes t o the patient.
3. Check each lead for signal and electrode connection
quality by observing the symbol on the patient
module display or preview screen.
4. Enter patient
ID
information a t t h e front key panel.
5. Press the
@
button on the patient module.
The
ECG
recording starts.
Ir'ou can halt the recording any
t h e
by pressing this
button again. To restart the recording, press
@
from the
patient module.
The patient ID number appears on t h e patient n o d u l e
display when you press
@
any time you have already
recorded an
ECG.
If you want t o use this
ID,
press
@
t o
ricord the
ECG.
2-12 Recording
an
ECG