Changing The Light Bulb - Pfaff SMART 100S Owner's Manual

Changing the light bulb

Disconnect the machine from the power supply by removing
the plug from the main socket!
Replace bulb with same type rated 10 watts (110-120V) or 15 watts
(220-240V).
- Loosen screw (A) as illustrated. (1)
- Remove the cover (B).
- Turn the bulb half a rotation counter clock-wise (C) (2) and
remove the bulb. Push the new bulb upward into the holder as
far as it will go and turn it half a rotation in a clock-wise direction
until it held fi rmly.
- Replace the cover and tighten screw.
Should there be any problem, ask your authorized Pfaff dealer for
advice.
8