Please ensure that all the above contents are correct. If any are missing please notify us immediately. 2. Description The FP1 is a metal zinc alloy shell standalone fingerprint reader for access control. It uses the American Atmel’s MCU, with precise electron circuit and good productive technology. This unit applies world advanced fingerprint identification technology, making it safe and reliable, which means it is an ideal choice for situations demanding high security.
4. Specification Input voltage 12V dc ± 10% Sleeping current consumption ≤20mA Idle current consumption ≤80mA Door relay contact load Operating temperature -20 to 50⁰C Operating humidity 20% to 95% RH Fingerprint capacity 1000 Resolution 450 DPI Fingerprint input time <1s Identification time <1s...
6. Wiring Colour Function Description Yellow OPEN Exit button 12V + 12V + DC regulated power input Black 12V – DC regulated power input Blue Relay output NO Purple Relay output COM Orange Relay output NC 7. To reset to factory default a.
9. Programming guide To enter programming mode Master code 9999 is the default master code To exit programming mode Note that to undertake the following programming the master user must be logged in To change the master code .New code. .#. .New code.