Features - Realtek RTL8812AE User Manual

2. Features

General
 QFN76 9x9mm package
 CMOS MAC, Baseband PHY and RF in a
single chip for IEEE 802.11a/b/g/n/ac Draft
2.0 compatible WLAN
 802.11ac MIMO solution for 5G band
 Complete 802.11n MIMO solution for
2.4GHz and 5Ghz band
 2x2 MIMO technology for extended reception
robustness and exceptional throughput
 Maximum PHY data rate up to 173.3 Mbps
using 20MHz bandwidth, 400Mbps using
40MHz bandwidth, and 866.7Mbps using
80MHz bandwidth.
 Backward
compatible
devices while operating at 802.11n data rates
 Backward compatible with 802.11a/n devices
while operating at 802.11ac data rates.
Host Interface
 Complies with PCI Express Base Specification
Revision 1.1
Standards Supported
 IEEE 802.11a/b/g/n/ac Draft 2.0 compatible
WLAN
 IEEE 802.11e QoS Enhancement (WMM)
 IEEE 802.11i (WPA, WPA2). Open, shared
key, and pair-wise key authentication services
 IEEE 802.11h TPC, Spectrum Measurement
 IEEE 802.11k Radio Resource Measurement
with 802.11a/b/g
1
Half Mini-Card User Manual
 WAPI
(Wireless Authentication Privacy
Infrastructure) certified.
 Cisco Compatible Extensions (CCX) for
WLAN devices
MAC Features
 Frame aggregation for increased MAC
efficiency (A-MSDU, A-MPDU)
 Low latency immediate High-Throughput
Block Acknowledgement (HT-BA)
 Long NAV for media reservation with CF-End
for NAV release
 PHY-level
spoofing to enhance legacy
compatibility
 MIMO power saving mechanism
 Channel management and co-existence
 Multiple
BSSID
RTL8812AE-CG to assume multiple MAC
identities when used as a wireless bridge
 Transmit
Opportunity
Inter-Frame Space (SIFS) bursting for higher
multimedia bandwidth
 WiFi Direct supports wireless peer to peer
applications.
Other Features
 Supports Wake-On-WLAN via Magic Packet
and Wake-up frame
 Transmit Beamforming
 CCA on secondary through RTS/CTS
handshake.
 Support TCP/UDP/IP checksum offload
RTL8812AE
feature allows the
(TXOP) Short
Rev.1.0