MTU 12V4000L62FB Operating Instructions Manual page 180

Connecting starter
1. Connect cables to starter as marked.
2. Screw nut (1) onto terminal 50 and tighten to specified torque using a torque wrench.
Name
Nut
3. Screw nuts (2), (3), (4), (5) onto terminals 30, 30 b, 45, 31 and tighten to specified torque using a torque
wrench.
Name
Nut
4. Check starter operation.
180 | Starting System | MS150098/03E 2018-04
Size Type
M5x0.8 Tightening torque
Size Type
M12x1.75 Tightening torque
Lubricant Value/Standard
2.5 Nm ±0.5 Nm
Lubricant Value/Standard
30 Nm ±3 Nm