Page 1
Katie Dropside cot Assembly and care instructions...
Page 2
RETAIN FOR FUTURE REFERENCE: READ CAREFULLY Thank you for purchasing an East Coast product. It’s been carefully designed and constructed to offer quality, safety and reliability for you and your baby. If you have a query about this product or require replacement parts, please contact 01692 408802.
Page 3
Assembly 1: Base End frame Cylindrical insert x 4 Bolt x 2 NOTE: Do not fully tighten bolts at this stage. Push the cylindrical inserts into the holes in the base, ensuring that the screwdriver slot in the end of the inserts faces outward and aligns with the hole as shown. Assembly 2: Side frame (Fixed) Bolt x 4...
Page 4
Assembly 3: Diagram A Diagram B Make sure that the plastic caps on the drop side To operate the dropside: (Part B) are in position over the head of the pins Grasp the top rail in the centre and lift slightly. in the upper rail of the dropside.
This product can be dismantled carefully for storage and transportation. This product has been designed and manufactured to: BS EN 716-1: 2017. For customer care or enquiries: Call: 01692 408802 Email: nursery@east-coast.co.uk East Coast Nursery Ltd. Robertson House, North Walsham, Norfolk, NR28 0BX eastcoastnursery.co.uk 2510 09_17...