Page 3
Barrel nuts x 4 Long bolts x 4 Hexagon key Short bolts x 8 Page 2...
Page 4
Cot assembly Insert barrel nuts into the holes on the inner faces of the base sides. Ensure the slots in the barrel nuts point towards the holes in the ends. Use a flat-bladed screwdriver to align if necessary. CAUTION: The base must be assembled the right way up At the preferred height, attach the base to one end using two long bolts and the...
Page 5
Attach a fixed side to both ends using four short bolts. Ensure that the plastic teething rail is at the top. Repeat for the second side. Finally tighten all bolts. Page 4...
Page 6
1) Carefully pull the top and bottom halves of the ends apart. For customer care or enquiries: Call: 01692 408802 Email: nursery@east-coast.co.uk East Coast Nursery Ltd. Robertson House, North Walsham, Norfolk, NR28 0BX eastcoastnursery.co.uk Page 5...
Need help?
Do you have a question about the Henley and is the answer not in the manual?
Questions and answers
Hello, I need the screw sizes I lost the screw.