Table of Contents
Advertisement
• Locate the tongue in the straight and horizontal position. Check this by measuring both "L1" locations. Once both
locations are the same length, move onto the next step.
• Measure both "L2" locations. Adjust both tie-rods to assure both measurments are equal, if necessary.
• Finish with taking measurments for "L3" and "L4. " L3 should be set 3/16" smaller than L4 by adjusting the tie-rods in
equal amounts.
• Measure both "L2" locations again. If both measurement are the same you are finished. If measurments are not the
same, repeat the entire process.
Adjusting Running Gear Toe-In
L1
L1
12
L2
L3
L4
L2
Tie-Rods
Advertisement
Table of Contents
