Table of Contents
Advertisement
• Keep tongue bolt tightened. The tongue bolt should be as tight as possible without over restricting the vertical
motion of the hitch.
• An extra washer (shown below) can be added if the nut is tightened so far that it runs out of threads before the
tongue bolt is as tight as possible.
• Tires should be inflated to the manufactures specifications.
• For running gears equipped with used tires, If either of the front tires look to be excessively worn or unevenly
worn they should be rotated with a less worn rear tire, if possible.
• The front tires should be towed in 3/16" on front overall, from rim to rim. 1/8" Min to 1/4" Max.
• Make sure the inner tongue bolt (shown below) is tightened enough to mitigate slop but still allow the inner
tongue to slide in and out of the outer tongue. It is acceptable to see the outer tongue squeezed inward by the
inner tongue bolt for a slop free fit.
Gravity Wagon Trail Adjustment
Tongue Ear
Inner Tongue Bolt
11
Hitch
Outer Tongue
Advertisement
Table of Contents
