Advertisement
IMPORTANT!
This Guide refers to the
following Products:
All Belkin Routers
All Belkin Modem
Routers
TSG-UK-1-007
TSG-UK-1-001
Self Help Guide
Self Help Guide
®
®
Please read the following carefully;
Synopsis:
This Self-Help Guide is designed to assist you if
you are having difficulty in forming a connection
between your PC and your Belkin Router or
Modem Router.
This guide will concentrate on the Local Area
Network (or LAN) connection between PC and
Router. Please refer to our separate guides if you
are experiencing other issues such as Internet
connectivity.
Requirements:
In order to complete the steps as outlined in this
Self-Help Guide you will simply need the following;
• A Belkin Router or Modem Router (powered)
• A Computer with a working RJ45 LAN Port
• An RJ45 (Patch) Networking Cable
The Guide is based upon Users of Windows
Operating
Windows 98SE, ME, 2000 or XP is required.
|
|
www.belkin.com
www.belkin.com
Systems
so
a
|
|
machine
running
Page 1 of 6
Page 1 of 1
Advertisement
Table of Contents
Related Manuals for Belkin TSG-UK-1-001
Summary of Contents for Belkin TSG-UK-1-001
- Page 1 Synopsis: This Self-Help Guide is designed to assist you if you are having difficulty in forming a connection between your PC and your Belkin Router or Modem Router. This guide will concentrate on the Local Area Network (or LAN) connection between PC and Router.
- Page 2 Internet Browser (i.e. Internet Explorer) and type the IP Address of the (Modem) Router into the Address Bar. This is usually 192.168.2.1. All being well the Web User Interface of the Belkin (Modem) Router should appear. If it doesn’t then the following steps should be undertaken.
- Page 3 A Black DOS-Window should appear with a flashing cursor. Simply type in ‘ipconfig’ and press ‘ENTER’*. *’ipconfig’ is an abbreviation of Internet Protocol Configuration – For older Operating Systems use ‘winipcfg’ TSG-UK-1-007 TSG-UK-1-001 Self Help Guide Self Help Guide ® ®...
- Page 4 DHCP Server. The Information shown in the Screenshot above shows that this is happening correctly; 1. The DNS Suffix shows ‘Belkin’ – This is the ‘Hostname’ of the Belkin (Modem) Router 2. The Default Gateway shows the Router’s IP Address (192.168.2.1) as used above.
- Page 5 Connection which is essentially the Network Card of your Computer. This will look similar to that shown below; If for any reason there is a red cross shown on the Icon then the physical connection should be checked. TSG-UK-1-001 TSG-UK-1-007 Self Help Guide Self Help Guide ®...
- Page 6 ‘Properties’. This will bring up the ‘Properties’ Window for your Computer’s Network Card. From the large white window select the option For ‘Internet Protocol (TCP/IP)’ Providing you Have administrative rights over the Computer the ‘Properties’ button should be highlighted. TSG-UK-1-001 TSG-UK-1-007 Self Help Guide Self Help Guide ® ®...
Need help?
Do you have a question about the TSG-UK-1-001 and is the answer not in the manual?
Questions and answers