Explanation Of Symbols; Warnings - Zener 8000-V Installation Manual

Table of Contents

Advertisement

Explanation of symbols

WARNING
CAUTION
WARNING
i

Warnings

Read all operating instructions before installing, wiring, operating, servicing or inspecting the
ZENER 8000-V.
Ensure that the instruction manual is made available to the final user of the product as well as
all personnel involved in any aspect of installation, adjustment or maintenance. Your ZENER
8000-V must be applied and installed by suitably qualified and experienced personnel in
accordance with this manual, good engineering practice and all local rules and regulations to
the end use environment.
There are hazardous voltages inside the ZENER 8000-V whenever it is connected to an electrical
supply and for some time afterwards.
Before touching anything inside the ZENER 8000-V enclosure or other equipment connected to
the ZENER 8000-V terminals, disconnect all sources of electrical power, wait at least 11 minutes
for capacitors within the ZENER 8000-V to discharge to less than 50VDC and then ensure, by
measurement, that there is no hazardous AC or DC voltage present at any terminal.
The ZENER 8000-V contains high energy circuits that may be hazardous. Do not operate ZENER
8000-V with the door open or any part of the enclosure removed.
Do not touch the terminals of the ZENER 8000-V or any associated motor and wiring when it is
energised, even if the ZENER 8000-V and motor are stopped. Electric shock may result.
Indicates a condition or practice that, if the warning is not strictly observed,
could result in personal injury or death.
Indicates a condition or practice, if the caution is not strictly observed, could
lead to damage or destruction of equipment or a significant impairment of
proper operation.
This symbol is used to highlight an electrical hazard. Failure to strictly observe
the warning could result in electrocution.
This symbol is used to highlight additional information on the product's
capabilities or a common error in installation, commissioning or operation.
IM00165
ZENER 8000-V Installation Manual
1

Advertisement

Table of Contents
loading

Table of Contents