Assembling Of Memory Card; Battery Recharge - Nyx kiwi-tv User Manual

3.3 Assembling of memory card

This mobile phone supports T-Flash card, which is a small multimedia memory
card used to increase the memory of your mobile phone. Take care when
assembling or disassembling to avoid the damage.

3.4 Battery Recharge

Connect the battery charger to a power outlet, plug the connector of the battery
charger into the mobile phone. Then the power level indicator at upper right
screen will flash.
"charging" indicating the battery is being charged. If the phone is deposited for
long time, the power indicator may take some time to appear on the screen. If the
power indicator at upper right screen of the phone displays battery full and stops
to flash, it means that the charge is done. If the phone is off, the screen will display
a Charge Completed indicator. During charge, it is normal if the battery, mobile
phone and battery charger are hot. After the charge, disconnect the AC outlet
and mobile phone with the battery charger.
If the phone is off when charging, the screen will display
Page 7 of 22