Table of Contents
Advertisement
3.3 How to charge the battery
Plug one end of the charger to the phone charging port, the other end into a household power outlet.
Note: This machine can be connected to a computer USB port to charge.
When charging the battery level indicator on the screen icon was dynamic display, until the battery is
full up.
After charging, disconnect the power, then unplug the charger, so that the charger no-load.
3.4 How to install & remove the SIM card
The machine supports two SIM cards. Before doing the following, make sure the phone is turned off and
no charging.
Open the back cover, remove the battery.
Make the golden contacts of the SIM card face down, Card gap facing the slot gap, and then put
into it.
Install the battery and close the battery cover.
SIM card's removal and installation steps are in reverse.
4.1 make a call
Enter the phone number in the standby screen, press the dial key with the selected SIM card to
make calls.
When to input,press the right function key to delete the number.
During the call press the end key to end the call.
You can also choose from a number of direct contacts to allocate;
4 Make & receive calls
Advertisement
Table of Contents
