User Profiles; Multimedia; Camera - Nyx kiwi-tv User Manual

Line switching: switch between line 1 and line 2.
It is up to the network service provider if you can make calls on line 2.
Advanced settings
Auto redial: You can select to redial the number automatically when a
call is not connected.
Call time reminder: After setting this function on, it will offer
warning tone towards the end of every minute sharp during the call
process, so you will be reminded of the call time at any time when
calling.
Answer mode: Set Any key or Auto answer when headset mode

6.5 User Profiles

You can select different modes on different occasions to carry out the personal
settings in the environment modes such as ring tone, vibration, volume, etc. This
function makes it possible to get adjusted to different situations without changing the
ring tone settings at multiple places, and you only need to switch to the pre-set
environment mode.
General mode: It is ringing alert by default;
Silent mode: It does not have ringing and vibrating alert
Meeting mode: It is vibrating alert by default;
Outdoor mode: It uses the maximum volume, vibration + ringing alert, by
default;
My style mode: You can set your own alert mode.
In every mode, you can edit the following in a separate manner:
Volume: set the volume for the ring tone and key tone.
Alert type: 4 manners are available: ringing, vibration, vibration and ringing,
and vibration then ringing.
Incoming call: set the tones for incoming calls, power on, power off, messages
tone and keypad tone, respectively.
Ringtone volume: set the incoming ringtone volume
Message: set the tones for message
Message volume: set the message tone volume
Keypad: set the keypad tone
Keypad volume: set the keypad tone volume
Power on: set the power on tone
Power off: set the power off tone
System alert: switch on or off the system alert

6.6 Multimedia

6.6.1

Camera

Select Camera in the main menu, you can enter into the photo-taking preview
Page 15 of 22