Belkin Power Supply User Manual page 7

SIMPLE INSTALLATION
♦
Hardware Installation
a. Connect the Serial cable to the battery backup's
communication port.
b. Connect the Serial cable to the PC's communication
port.
c. Make sure the communication port selector on the
back of the battery backup is on RS-232 (Serial).
♦
Software Installation
a. Log in as the super-user.
b. Insert Belkin Power Management Software for Unix
CD in CD-ROM Driver.
(1) Mount the Belkin Power Management Software for
Unix CD into Unix file directory '/mnt/cdrom'. For
instance, in Linux, type:
# mount -t iso9660 /dev/hdd /mnt/cdrom
(Please use device name of your system.
Reference Appendix B for more information.)
(2) Copy the files in directory '/mnt/cdrom' into '/tmp'
# cp /mnt/cdrom/unix/* /tmp
c. Execute the installation program:
# cd /tmp
# chmod 555 install
# ./install
d. Select the target system from the menu, and
configuration the Belkin Power Management Software for
Unix (make sure no other process uses the same serial
port). the installation program will launch the Belkin
Power Management Software for Unix daemon process
automatically.
---For More Parameters, Please Reference Other Topics.-
Belkin Power Management Software
2
Linux, FreeBSD