Community Name And Ip Address Configuration - Belkin Power Supply User Manual

For Linux OS, check the file '/etc/inittab' for the line
below, and change "respawn" to "off":
ttya:2345:respawn:/sbin/getty 9600 ttyS0
Change this value to "off"
Execute this command if you modified the '/etc/ttytab' file.
This will force an initial process that closes and re-opens
the terminals.
kill -1 1
3. Change the file permission of '/dev/ttyS0'
chmod 666 /dev/ttyS0

4.3.3. Community Name and IP Address Configuration

Set option [k] to Monitor local UPS SNMP agent if you
intend to use Belkin Power Management Software to
monitor a UPS attached to a local SNMP agent. The host
computer (this computer's IP address) should have
read-write access right to the SNMP agent.
[o] Community Name
The community name should correspond to a community
known to the UPS SNMP agent.
[p] Ip Address
The target SNMP Agent IP address.
Belkin Power Management Software
43
Com1