Belkin Power Supply User Manual page 61

T
o monitor a remote
1. Type "/etc/belkin/belkin status" to bring up the initial
select screen.
2. Press [r]. Fields where you could input the IP Address
and Community Name appears.
3. Press [I]. Key in the IP Address of the remote SNMP
Adapter. Press [enter] when through.
4. Press [c]. Key in an appropriate Community Name for
the remote SNMP Adapter. Press [enter] when through.
5. Press [enter].
appears.
Belkin Power Management Software
UPS
A screen displaying the UPS status
53