Table of Contents
Advertisement
C. FRONT MODULE ASSEMBLY
C12. Assemble bellcrank onto chassis
STEERING BAG
Bellcrank Sleeve
Bellcrank Arm
3x8mm CS
3x6x.05mm MW
5x8x2.5mm PB (2)
3x10mm CSS (2)
STEERING BAG
C14. Install toe links
Toe Link (2)
3x15mm CCS (2)
3x15mm BCS (2)
ACCESSORY
Option Part
3643 Turnbuckle
Camber Links
Completed front module assembly
14 • STAMPEDE 4X4
3x8mm
3x6x.05mm
CS*
MW
5x8x2.5mm
PB
Bellcrank
Sleeve
Bellcrank
Arm
5x8x2.5mm
PB
*Note: Do not overtighten
3x15mm
BCS
Toe Link
57.9mm
87.9mm
C13. Install steering draglink onto bellcrank
3x10mm
CSS
Steering draglink orientation
Note orientation
3x15mm
CCS
Note: Install
from underside
Check your assembly carefully.
3x15mm
BCS
Toe Link
Advertisement
Table of Contents
