1. Manuals
  2. Brands
  3. GVS Manuals
  4. Controller
  5. K-BUS AMRW-24/10.1
  6. User manual

GVS K-BUS AMRW-24/10.1 User Manual

Switch blind actuator, knx/eib intelligent installation systems
Hide thumbs
Table of Contents

Advertisement

Quick Links

Guangzhou Video-star Electronics Industrial Co., Ltd
K-BUS
Switch Blind Actuator
○
R
User Manual-Ver. 1.2
AMRW-24/10.1
KNX/EIB Intelligent Installation Systems
www.video-star.com.cn
marketing@video-star.com.cn
Tel.：（8620）39338986
Fax：（8620）39338465

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the K-BUS AMRW-24/10.1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for GVS K-BUS AMRW-24/10.1

Summary of Contents for GVS K-BUS AMRW-24/10.1

  • Page 1 Guangzhou Video-star Electronics Industrial Co., Ltd K-BUS Switch Blind Actuator ○ User Manual-Ver. 1.2 AMRW-24/10.1 KNX/EIB Intelligent Installation Systems www.video-star.com.cn marketing@video-star.com.cn Tel.：（8620）39338986 Fax：（8620）39338465...
  • Page 2 Switch Blind Actuator K-BUS KNX/EIB ○ User manual update instructions： Ver. Date Edit contents Edit position 2017.1.4 Published the first edition 2017.4.11 1. Add function of the parameter Chapter 4.4.1 page 29 “When blind is under end position, up/down object function is” 2017.5.25 Add connection diagram of blind Chapter 3.2 page 8...

  • Page 3: Table Of Contents

    Switch Blind Actuator K-BUS KNX/EIB ○ Contents 1. General--------------------------------------------------------------------------------------------------------------------------------------4 2. Technical Data---------------------------------------------------------------------------------------------------------------------------- 6 3. Dimension and Connection Diagram------------------------------------------------------------------------------------------------7 3.1 Dimension diagram------------------------------------------------------------------------------------------------------------------- 7 3.2 Connection diagram------------------------------------------------------------------------------------------------------------------ 8 4. Parameter setting description in ETS--------------------------------------------------------------------------------------------- 10 4.1 Parameter window “General”----------------------------------------------------------------------------------------------------- 10 4.2 Parameter window “Channel function”----------------------------------------------------------------------------------------- 12 4.3 Switch outputs (A~L)---------------------------------------------------------------------------------------------------------------13 4.3.1 Parameter window “Channel X ”----------------------------------------------------------------------------------------- 13...

  • Page 4: General

    Switch Blind Actuator K-BUS KNX/EIB ○ 1. General The Switch Blind actuator is a multi-output module, providing 24 channels switch outputs or 12 channels curtains outputs, you can configure the functions of the module according to your requirement, such as some channels are used as switch outputs, other channels are used as curtains outputs.
  • Page 5 Switch Blind Actuator K-BUS KNX/EIB ○ ——Shutter output, which can connect with motor blinds, awnings, roller blinds, vertical blind, etc. There are 12 outputs with 230V AC 1000W motor or dry contact controlling motor. The output contacts for the directions UP and DOWN.

  • Page 6: Technical Data

    Switch Blind Actuator K-BUS KNX/EIB ○ 2. Technical Data Power Supply Bus Voltage，EIB 21~30V DC, from EIB bus Current consumption, EIB <12mA Power consumption, EIB <360mW <1W Power consumption 10A Capacitor charge current Max. 24mA Output 24 channels Can be individually set (including switch, shutter ) rated voltage 230/400V AC（50/60Hz）...

  • Page 7: Dimension And Connection Diagram

    Switch Blind Actuator K-BUS KNX/EIB ○ Housing/color Plastic housing, gray Installation On 35mm DIN-Rail To EN 60 715 Dimension 216mm ×90 mm ×64mm Weight 0.8KG Note: The above load is only for single lamps. In the case of several lamps in parallel, the load will be reduced, although the power is unchanged, but the instantaneous impact of current will increase, and easy to make the relay contacts melted.

  • Page 8: Connection Diagram

    Switch Blind Actuator K-BUS KNX/EIB ○ 3.2 Connection diagram www.video-star.com.cn marketing@video-star.com.cn Tel.：（8620）39338986 Fax：（8620）39338465...
  • Page 9 Switch Blind Actuator K-BUS KNX/EIB ○ ①③ Output terminals A~L, such as A1,A2 of them can be as two channel switch outputs or one channel curtain output. As curtain output, A1 corresponds to A↑, A2 corresponds to A↓. The other channels have the same usage. ②...

  • Page 10: Parameter Setting Description In Ets

    Switch Blind Actuator K-BUS KNX/EIB ○ 4. Parameter setting description in ETS The parameters will be described in the form of the function interfaces. 4.1 Parameter window “General” Parameter window “General” can be shown in fig.4.1. Here set some general parameters, that applies to the curtain output, also applies to the switch output.
  • Page 11 Switch Blind Actuator K-BUS KNX/EIB ○ with the value “1” will be sent cyclically according to the setting to the bus. Options: 0…240s, 0=cyclical send inactive It is suggested to select the maximum time interval according to the application to keep the bus load as low as possible.

  • Page 12: Parameter Window "Channel Function

    Switch Blind Actuator K-BUS KNX/EIB ○ Enable If enable， the object “ Central control for all of switch” is visible， all channels with central control enabled can be switched together via the object. Parameter “Manual operation” The parameter defines whether the manual operation enables. Options： Disable Enable If the enable is selected, the Man.

  • Page 13: Switch Outputs (A

    Switch Blind Actuator K-BUS KNX/EIB ○ Fig. 4.2 Parameter Window“Channel function” When the channel is enabled, the corresponding parameters can be set. 4.3 Switch outputs (A~L) There are max. 24 outputs. Each output can be set separately, and parameters and objects which are assigned to each output are the same.
  • Page 14 Switch Blind Actuator K-BUS KNX/EIB ○ Fig. 4.3 parameter window “Channel X ” Parameter “Central control of channel” The parameter sets whether the central control of the channel is enabled. Options： Disable Enable If enable，the channel can be controlled via the object “Central control for all of switch”. Parameter “If bus recovery，contact is”...
  • Page 15 Switch Blind Actuator K-BUS KNX/EIB ○ when selecting “open”, the contact will be open; while it is closed when selecting “closed”. Parameter “After downloading, contact is” This parameter set the contact position of the output after downloading. Options: Open As bus recovery If “open”, the output is open after downloading.
  • Page 16 Switch Blind Actuator K-BUS KNX/EIB ○ This parameter defines the contact position when switch on the switch, which will be triggered by the communication object “switch, X”. When enabling “input 0” in the logic function, it will use the communication object “switch, X”...

  • Page 17: Parameter Window "X : Time

    Switch Blind Actuator K-BUS KNX/EIB ○ When the logic function “input 0” enables, the object “switch, X” used as input of “input 0”, the operation of general switch will become invalid. Parameter “Special functions of switch actuator mode” This parameter defines whether enable the special functions of the switch actuator. The parameter window “X : Function”...

  • Page 18: Selection "Delay

    Switch Blind Actuator K-BUS KNX/EIB ○ Fig. 4.6 parameter window “X : Time-Delay ” Parameter “Type of time function” The parameter defines the type of the time function, there are three options for the mode of work. Options： Delay Flashing Staircase 4.3.2.1 Selection “Delay”...

  • Page 19: Selection "Flashing

    Switch Blind Actuator K-BUS KNX/EIB ○ 4.3.2.2 Selection “Flashing” The parameter window in Fig. 4.7 “X: Time-flashing” will be shown up when selecting “flashing” in the parameter “Type of time function”. The flashing switch function is mainly used for lamp aging test. Fig.

  • Page 20: Selection "Staircase

    Switch Blind Actuator K-BUS KNX/EIB ○ This parameter sets the flashing times.0 means no limited. A flashing includes an on and an off actions. Options:0...255 Parameter “Contact position after flashing” This parameter defines the relay contact position after flashing. Options: Unchanged Open Close...

  • Page 21: Parameter Window "X : Logic

    Switch Blind Actuator K-BUS KNX/EIB ○ lighting can be set via a parameter. The duration time of the lighting on is also set via a parameter. Parameter “Duration of staircase lighting--(0...1000 min) --(0...59 s)” This parameter describes the duration time when switching on the staircase lighting. Options: 0…1000min 0…59s Parameter “Control mode of staircase lighting”...
  • Page 22 Switch Blind Actuator K-BUS KNX/EIB ○ Fig. 4.9 parameter window “X : Logic” There are 2 logic communication objects to decide the status of each output, which are related to the “Switch”, as shown in fig. 4.4 It will re-operate when receiving a new object value as the final output status (close the contact with “1”, open it with “0”).
  • Page 23 Switch Blind Actuator K-BUS KNX/EIB ○ Parameter “Input x of Logic” (x = 1, 2)” This parameter is used to enable input1 and input 2. If enable, their communication objects “logic 1” and “logic 2” will be also visible. Options: Disable Enable Parameter “Logic function type”...

  • Page 24: Parameter Window "X : Scene

    Switch Blind Actuator K-BUS KNX/EIB ○ result will makes operations with the value of “Input 2”, and the final operation result as the final output (close the contact with “1”, open it with “0”). 2. If an input is not enabled, this input is ignored. 3.

  • Page 25: Parameter Window "X ：Forced

    Switch Blind Actuator K-BUS KNX/EIB ○ Parameter “Overwrite scene stored values during download” Options: Disable Enable If selecting “Disable”,the stored values before the download can be not overwritten by the parameterized scene value. If selecting “Enable”,the stored values will be overwritten by the parameterized scene value during the download .

  • Page 26: Parameter Window "X ：Operation Hours Counter

    Switch Blind Actuator K-BUS KNX/EIB ○ Parameter “Force operation type” The parameter defines the control type of force operation. Options: 1bit 2bit If selecting“1bit”, object “Forced output” receives telegram “1” to activate force operation, telegram “0” to cancel the force operation. If selecting“2bit”, when the object “Forced output”...

  • Page 27: Shutter Outputs (A~L)

    Switch Blind Actuator K-BUS KNX/EIB ○ Fig. 4.12 parameter window “X ：Operation hours counter” Parameter “Object datatype of “ Operation hours counter” This parameter is used to select data type of the operation hours counter. Options: 2 byte Value (DPT 7.001) 4 byte Value (DPT 12.001) Parameter “Cyclically send counter value in h[0..100] (0=not send, only for reading)”...
  • Page 28 Switch Blind Actuator K-BUS KNX/EIB ○ Fig.4.13 parameter window “Channel X” Parameter “Config channel function as:” This parameter is used to define the output mode. Different output modes have different parameters and communications. Options: Shutter Blinds If selecting “Shutter”, the output is for the Shutter operation mode, which can operate the curtain with louvres. If selecting “Blind”, the output is similar with the Shutter operation mode, except that it cannot adjust louvres.
  • Page 29 Switch Blind Actuator K-BUS KNX/EIB ○ If the option “Unchange” is set, the output contacts remain in their current position. If the option “up” is set, the Shutter is moved to the top after bus voltage recovery. If the option “down” is set, the Shutter is moved to the bottom after bus voltage recovery. If the option “stop”...
  • Page 30 Switch Blind Actuator K-BUS KNX/EIB ○ receives a telegram “0”, the Shutter is moved to the top; the object receives a telegram “1”, the Shutter is moved to the bottom. If the option “move to save position” is selected, the object receives a telegram “0”, the Shutter is moved to the top, then back to its original position;...

  • Page 31: Parameter Window "X: Drive

    Switch Blind Actuator K-BUS KNX/EIB ○ information of shutter position to the bus. If select“Respond after change”, when the shutter position changes, object “Shutter position status/slat position status”send the telegram to the bus,so as to report the shutter position. 4.4.1.1 Parameter window “X: Drive”...
  • Page 32 Switch Blind Actuator K-BUS KNX/EIB ○ Note: The current position of the Shutter during operation can also be determined with the help of the total move time. It is therefore important to measure and set the total move time as accurately as possible, particularly if the functions “Move to position via a 1byte value”...

  • Page 33: Parameter Window "X: Auto

    Switch Blind Actuator K-BUS KNX/EIB ○ The parameter is used for setting the total move time of slat adjustments from fully closed to fully open. It determines the current position of the slat during operation. It is therefore important to measure and set the total move time of slat as accurately as possible, particularly if the functions “adjust to position via a 1byte value”...
  • Page 34 Switch Blind Actuator K-BUS KNX/EIB ○ Fig.4.15 Parameter window“X：Auto.” Parameter “Function automatic ” The parameter is used to set whether the Auto. Control operation is activated, i.e. the Automatic sun protection function. Options: Inactive Active If the option “ Active ” is selected, the following three parameters will be visible. The communication objects “Enable auto.
  • Page 35 Switch Blind Actuator K-BUS KNX/EIB ○ The parameter defines the initial value of the communication object “Enable auto. control” after bus voltage recovery. Options: “0” (disable auto. control) “1” (enable auto. control) If select “0”, the initial value is 0, indicate that the auto. Operation is deactivated after bus voltage recovery. If select “1”, the initial value is 1, indicate that the auto.
  • Page 36 Switch Blind Actuator K-BUS KNX/EIB ○ position depending on the values that the objects “Sun: slat adj.[0…100%]” and “Sun: Shutter position [0… 100%]” received. After programming or bus voltage recovery, the two objects values are uncertain, and then their values are “ 130” by default. Only when the two objects receive the values, the position is confirmed. In any operating status, the values that the two objects receive can be stored, including the safety operation of the higher priority.

  • Page 37: Parameter Window"X: Scene

    Switch Blind Actuator K-BUS KNX/EIB ○ With the help of the second switch sensor, the user can specify whether to enable the automatic sun protection or to control the shutters/blinds manually. If the automatic sun protection is activated via a switch sensor, the shutter/blind moves automatically until either the automatic sun protection is deactivated via the same switch sensor or the user sends a direct movement command and the automatic function is thus also deactivated.

  • Page 38: Parameter Window "X: Safety

    Switch Blind Actuator K-BUS KNX/EIB ○ scene. Options: Scene 1... Scene 64 , 0=no assignment Note: 1-64 in the parameter setting corresponds to the telegram 0-63 received. On bus voltage failure, the modified scene value is not stored. Parameter “--Shutter position 0…100%(0%=top,100%=bottom)” This parameter is used to set the preset position of Shutter for a scene: 0…100%,0%=top, 100%=bottom Parameter “--slat position 0…100%(0%=opened,100%=closed)”...
  • Page 39 Switch Blind Actuator K-BUS KNX/EIB ○ When select “Inactive”, the safety operation will be disabled; When select “active”, the follow parameters will become visible, you are able to set conditions to trigger safety operation and relevant communication object “Safety operation 1/2” will be enabled. Parameter “safety operation trigger value (Cancel safety is opposite of selection)”...

  • Page 40: Parameter Window "Channel X: Blind

    Switch Blind Actuator K-BUS KNX/EIB ○ The priority of the safety operations is higher than other operation, if the safety operation is activated, other operation will be ignored. And the priority of safety operation 2 is higher than that of 1. 4.4.2 Parameter window “Channel X: Blind”...

  • Page 41: Communication Objects Description

    Switch Blind Actuator K-BUS KNX/EIB ○ 5. Communication Objects Description Communication object is the media of devices on the bus communicate with other device, that is, just communication object can communicate with the bus. The role of each communication objects as following. Note: “C”...
  • Page 42 Switch Blind Actuator K-BUS KNX/EIB ○ Output X Switch status 1bit C,R,T 1.001 DPT_Switch This object indicates the contact status (details will be defined by parameter “Object value of switch status:” in “Channel X Switch”). If selecting “respond, after read only”, the status telegram will not be sent out until receiving a read request telegrams from the bus via the object.
  • Page 43 Switch Blind Actuator K-BUS KNX/EIB ○ 1bit 1.001 DPT_Switch Output X Flashing function When select “flashing ” in the parameter “Type of time function”, the object will be activated, then the flashing switch function will be activated via the object. 1bit 1.001 DPT_Switch Output X...

  • Page 44: Communication Objects Of Shutter Outputs

    Switch Blind Actuator K-BUS KNX/EIB ○ If 2bit, the contact is forced closed when receiving telegram “3”; the contact is forced opened when receiving telegram “2”; cancel the force operation with telegram “1” or “0”. Output X Logic 1 1bit 1.001 DPT_Switch This object will be enabled when selecting “enable”...
  • Page 45 Switch Blind Actuator K-BUS KNX/EIB ○ Output X Slat adj. / Stop 1Bit 1.007 DPT_Step If the Shutter/Blind is in motion, the movement is stopped on this communication object receiving a telegram value “0” or “1”. “Shutter” operating mode: if the Blind is idle, it is raised for the slat adjustment on the communication object receiving a telegram value “0”;...
  • Page 46 Switch Blind Actuator K-BUS KNX/EIB ○ X: 0 NNNNNN: scene number (0-63). 1-64 in the parameter setting corresponds to the scene number 0-63 received by the communication object “Scene”. For example, scene 1 in the parameter setting has the same output result as scene 0 in the communication object “Scene”. As follow: Object value Description...
  • Page 47 Switch Blind Actuator K-BUS KNX/EIB ○ Output X Sun: shutter/blind position[0…100%] 1byte 5.001 DPT_Scaling In Auto. Operation status, if this communication object receives a telegram value, the Shutter/Blind moves to the corresponding position for the received value. In the “Shutter” operation mode, after the Shutter reaching the target position, the slat are positioned as before.

Table of Contents