Stopping The Machine; Parking The Machine - Kubota Z411 Operator's Manual

OPERATING THE MACHINE
Sharp (zero) left turn:
Push the right motion control lever forward and pull the
left motion control lever rearward at the same time.
Sharp (zero) right turn:
Push the left motion control lever forward and pull the
right motion control lever rearward at the same time.
Adjustment
WARNING
To avoid serious injury or death:
• The motion control
important to ensure the machine operates
properly.
38
lever adjustment is
NOTE :
• The motion control levers are adjustable.
(If adjustment is required, see ADJUSTMENT on
page 70.)
We recommend you to contact your local
KUBOTA Dealer.

STOPPING THE MACHINE

WARNING
To avoid serious injury or death:
• Park the machine on level ground.
If necessary to park on an incline, stop the
machine, apply the parking brake, and then stop
the engine.
• If you stop the engine on an incline without
applying the parking brake, the machine could
move and run away.
IMPORTANT :
• The parking brake is for parking use only. If the
parking brake is applied when the motion
control levers are not in the "NEUTRAL LOCK"
position, the engine will stop. This feature is to
prevent brake and transmission damage during
operation.
1. Move both motion control levers to the "NEUTRAL"
position to stop the machine.
2. Move both motion control levers to the "NEUTRAL
LOCK" position.
3. Apply the parking brake.
4. Move the throttle lever to the half speed position
and push the PTO switch to the "DISENGAGE"
(OFF) position.
5. Lower all implements to the ground.
6. Turn off the engine and remove the key.
IMPORTANT :
• Do not stop the engine when the machine is
on an incline for a long time. The engine oil
may go into the carburetor and the muffler
through the valve system.
• Before stopping the engine, place the
throttle control lever in the half speed
position to help prevent the engine from
backfiring.

PARKING THE MACHINE

WARNING
To avoid serious injury or death:
Before leaving the operator's position:
STOPPING THE MACHINE
Z400