Benewake TFmini Plus Product Manual page 14

Benewake (Beijing) Co. Ltd.
SJ-PM-TFmini Plus-T-01 A01
② Connection of the hardware
Connect "TFmini Plus", "TTL - USB board" and "USB cable" as shown in Figure 6. Make sure there is no
loose connection. Then connect "USB cable" with "PC".
Figure 5 Schematic Diagram of Correct Connection
③ Connection to the Test software and data output
Open the PC software and select "① TFmini Plus" and select automatically recognized occupied serial
port (here it is "② COM57"), as shown in Figure 6.
Then click "CONNECT". Upon successful connection, The continuous images of the output data will be
displayed in area "④ TIME LINE CHART" on the right. Besides, the real-time data of the Current measure
distance (Dist), effective data points per second (Effective Points) and signal strength (Strength) will be
displayed in area "⑥ REAL TIME DATA" below.
Page14