Related Manuals for Telect 06004-01
Summary of Contents for Telect 06004-01
- Page 1 Low-Current 20/20 GMT Series Fuse Panels Power :: Models 06004-01 & 06004-11 Installation Guide © Telect, Inc. All rights reserved. .6.17 v.2 1.509.926.6000 :: telect.com...
- Page 2 22425 East Appleway Ave. #11, Liberty Lake, WA 99019 Telect assumes no liability from the application or use of these products. Neither does Telect convey any license under its patent rights nor the patent rights of others. This document and the products described herein are subject to change without notice.
-
Page 3: Table Of Contents
Low-Current 20/20 GMT Series Fuse Panels Power :: Models 06004-01 & 06004-11 Installation Guide Table of Contents 1.1 Overview................................1 1.2 Specifications ..............................3 1.3 Inspection ................................4 1.4 Installation ................................5 1.5 Alarm Wiring ..............................10 1.5.1 Standard Alarms ............................10 1.5.2 Auxiliary Alarms ............................10 1.6 GMT Fuses ................................12... -
Page 4: Overview
Figure 1 - Model 06004 − Dual-circuit, separately fused input buses for Sides A and B • Model 06004-01 is the standard panel containing separate Side A and Side B GMT fuse failure alarms and corresponding LEDs. Standard features for Model 06004-01 include: −... -
Page 5: Figure 3 - Model 06004-01 (Rear View)
GMT output fuses are available in capacities ranging from 0.18A to 10A. GMT splash covers are optional for maximum safety when fuses blow. (Visit our website at www.telect.com or see Section “1.6 GMT Fuses” on page 12 for ordering GMT fuses.) The panel is delivered with “dummy” fuses in all positions. -
Page 6: Specifications
Low-Current 20/20 GMT Series Fuse Panels Power :: Models 06004-01 & 06004-11 Installation Guide 1.2 Specifications Physical: Specifications: Dimensions (nominal without bracket)* Width: 17 in. (432 mm) Height: 1.75 in. (44.4 mm) Depth: 9.25 in. (235 mm) Weight 8.5 lb (~3.8 kg) -
Page 7: Inspection
Immediately report any shipping damage, defects or missing parts to Telect at 509-926-6000. Keep all documentation that comes with your shipment. Telect is not liable for shipping damage. If the product is damaged, notify the carrier and call Telect at 509-926-6000 or email Telect at getinfo@telect.com NOTE: For service or warranty information, please visit the Telect website at www.telect.com, email inquiries to... -
Page 8: Installation
ALERT ALERT ALERT! Each panel is tested at the factory. Telect recommends that you perform the testing outlined in the following procedure to ensure that no damage has occurred during shipping and handling. Both ALERT! Each panel is tested at the factory. Telect recommends that you perform the test- sides A and B input circuits, as applicable, need to be tested. -
Page 9: Figure 6 - Bracket Installation (Examples)
Low-Current 20/20 GMT Series Fuse Panels Power :: Models 06004-01 & 06004-11 Installation Guide 2. Select the proper pair of brackets and discard the other two. 2. Select the proper pair of brackets and discard the other two. 2. Select the proper pair of brackets and discard the other two. -
Page 10: Figure 8 - Connecting The Lug To The Rear Panel
17. Make sure that only dummy GMT fuses are installed in this panel or that the GMT fuse holders are vacant. 18. Enable the fuse or breaker at the PDU (25A max. for Model 06004-01; 35A max. for Model 18. Enable the fuse or breaker at the PDU (25A max. for Model 06004-01; 35A max. -
Page 11: Figure 10 - Fail Relay Alarm Pins
15A for a panel with a fail-safe circuit. with a fail-safe circuit. Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 130358-2 A0.1 © Telect, Inc. All rights reserved. 3.6.17 v.2 Page 8... -
Page 12: Figure 11 - Designation Card
Low-Current 20/20 GMT Series Fuse Panels Power :: Models 06004-01 & 06004-11 Installation Guide 24. Telect recommends that you lightly coat anti-oxidant on bare wires before connecting to out- put terminals. (NEC specifies only one conductor and load for each output terminal.) 25. -
Page 13: Alarm Wiring
Model 06004-01 has a standard alarm relay (FAIL RELAY) for each feed — one for Side A and Model 06004-01 has a standard alarm relay (FAIL RELAY) for each feed — one for Side A and one for Side B. Model 06004-11 contains the standard alarm relay plus an auxiliary relay (AUX RELAY) that can be triggered externally. -
Page 14: Figure 14 - Auxiliary Alarm Wiring
Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 130358-2 A0.1 Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 130358-2 A0.1 www.telect.com •... -
Page 15: Gmt Fuses
Low-Current 20/20 GMT Series Fuse Panels 1.6 GMT Fuses Power :: Models 06004-01 & 06004-11 Installation Guide Part Part 1.6 GMT Fuses Numbers Numbers GMT Fuse GMT Fuse GMT Fuse Part Numbers GMT Fuse GMT Fuse GMT Fuse .18A Yellow (YEL) 130781 ¼A Violet (VIO) -
Page 16: Figure 16 - Rear, Top And Front Views
This document and the Telect assumes no liability for the application or use of these products. Neither does Telect convey any license under its patent rights or the patent rights of others. This document and the products described herein are subject products described herein are subject to change without notice. - Page 17 1536 E. Valencia Drive; Fullerton, CA, USA 92831-4797; Tel (714) 879-6110; Fax (714) 879-6117 Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 130358-2 A0.1 Page 14 © Telect, Inc. All rights reserved. 3.6.17 v.2...
Need help?
Do you have a question about the 06004-01 and is the answer not in the manual?
Questions and answers