Telect GMT Series Installation Manual
100a/60a universal voltage fuse panels with enhanced power/fuse & bay alarms
Hide thumbs
Also See for GMT Series:
- Installation manual (20 pages) ,
- User manual (22 pages) ,
- Installation manual (17 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Telect GMT Series
Summary of Contents for Telect GMT Series
- Page 1 100A/60A Universal Voltage GMT Fuse Panels With Enhanced Power/Fuse & Bay Alarms GMT-Series Installation Guide Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1...
- Page 2 1730 N Madson St., Liberty Lake, Washington Telect assumes no liability from the application or use of these products. Neither does Telect convey any license under its patent rights nor the patent rights of others. This document and the products described herein are subject to change without notice.
-
Page 3: Table Of Contents
HPGMT10 (Typical Dimensions also for GMT10, HPGMT10S, HPGMT15, HPGMT20S, & HPGMT30S) ........................17 HPGMT10FA ..........................18 HPGMT10FA ..........................19 GMT10FA ..........................20 Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1 Page iii... - Page 4 Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2009 Telect, Inc., All Rights Reserved, 132152-4 A1 Page iv...
- Page 5 Major and minor bay alarm LEDs and wirewrap terminals are controlled via an on-board relay triggered by an external switch closure. All on-board relay Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1 Page 1...
-
Page 6: Gmt-Series Comparison Chart
GMT fuses, fuse designation pins, and other accessories. The following table shows a comparison of the GMT-series fuses. All Telect’s GMT-Series panels are UL listed (US and Canada, File E139903) and NEBS Level 3 certified, and RoHS compliant. Legend:... -
Page 7: Specifications
Dry Form-C contacts (1A @ 30 Vdc, 0.3A @ 100 Vdc, 0.5A @ 125 Vac) Max. Alarm Power Rating @24V: 72 mA (1.73W) @48V: 147 mA (7.06W) Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1 Page 3... - Page 8 All Single & Dual Panels with 10 GMTs Per Side, Except GMT10FA & HPGMT10FA Installed 8 lb (3.5 kg) Shipping 11 lb (5 kg) Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1 Page 4...
-
Page 9: Important Installation Guidelines
(e.g. use of power strips). • Disconnect Device - A readily accessible disconnect device shall be incorporated in the building installation wiring Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1 Page 5... -
Page 10: Installation
Immediately report any shipping damage, defects, or missing parts to Telect at 1-800-551- 4567. Keep all documentation that comes with your shipment. Telect is not liable for shipping damage. If damaged, notify the carrier and call Telect’s Customer Service Department at 1- 800-551-4567 (domestic only) or 1-509-926-6000 for further recourse. -
Page 11: Rack Mounting
[PDU]) before connecting this panel’s input cables to that PDU. WARNING WARNING! Before connecting input power cables, make sure the input power to the panel is turned off. Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1 Page 7... -
Page 12: Input Connections On A 100A Panel
Strip off about ¾ in. (10 mm) of insulation at end of input conductors (min. #6 AWG for a 60A feed). b. If desired (highly recommended), lightly coat anti-oxidant on the bare conductor. Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1 Page 8... -
Page 13: Input Connections On A 60A Panel
Expect continuity (0Ω) between Terminals C and NC. • Expect an open circuit (∞Ω) between Terminals C and NO. Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1 Page 9... -
Page 14: Alarm Terminals On Rear Of Panel
Working with one wire at a time, either • Crimp a single-hole ring or fork lug for a #3-48 screw-post terminal, as required by NEC, Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1 Page 10... -
Page 15: Designation Card
21. If possible, replace one of the operable GMT fuses with a blown fuse to verify that the appli- cable FUSE Alarm LED turns red. Also, check the FUSE alarm terminals on the rear of the panel: Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1 Page 11... -
Page 16: Accessories & Alarm Card
1.5 Accessories & Alarm Card The following lists optional and replacement items for the panel. For compression lugs, please refer to Wire Sizing & Label Convention Chart (Telect Part No. 117995) included with your panel. WARNING WARNING! Use only UL-listed fuses or UL-recognized component secondary protection devices. -
Page 17: Single-Hole Lug Part Numbers For Gmt20 Output Terminals (For #3 Panhead Screws)
Burndy TP14-2Z with a flanged, straight, forked tongue, also for #16 - #14 AWG 1.5.3 GMT Fuses For additional dummy fuses, order part #101557. For GMT safety (splash/splatter) covers, order part #116915 for GMT fuses up to 15A. Telect recommends using only UL-recognized supplementary protectors. Part Numbers... -
Page 18: Alarm Card
Figure 12 - Alarm Card Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1 Page 14... -
Page 19: Diagrams
1.6 Diagrams The diagrams that follow are representative of Telect’s GMT-Series of power panels. BATT INPUT A GMT OUTPUT A GMT OUTPUT A BATT MAJ MIN FUSE PWR A FUSE A PWR B ALARM PCB FUSE B C GND MINOR ALM... -
Page 20: Dimensions
1.7 Dimensions The dimensioned drawings that follow are representative of Telect’s GMT-Series of power panels. NOTES: 1. All dimensions are in in. [mm]. 2. Panel includes phoney fuses. Actual DO NOT REMOVE PLASTIC CAPS fuses are sold separately. #3-48 Screw Posts 0.19 [4.8]... -
Page 21: Hpgmt10
23.00 [584.2] FRONT VIEW HPGMT10 Figure 16 - HPGMT10 (Typical Dimensions also for GMT10, HPGMT10S, HPGMT15, HPGMT20S, & HPGMT30S) Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1 Page 17... - Page 22 V- - - V- - - 21.00 [533.4] 22.31 [566.7] 23.00 [584.2] HPGMT20 FRONT VIEW Figure 17 - HPGMT10FA Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1 Page 18...
-
Page 23: Hpgmt10Fa
- 20 Studs W ith KEPS Nuts & Flat W ashers 17.00 [431.8] 18.31 [465.1] 19.00 [482.6] 22.31 [566.7] 23.00 [584.2] HPGMT10FA FRONT VIEW Figure 18 - HPGMT10FA Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1 Page 19... -
Page 24: Gmt10Fa
10-32 Studs With KEPS Nuts & Flat Washers Barrel Connector 21.00 [533.4] 22.31 [566.7] 23.00 [584.2] FRONT VIEW GMT10FA Figure 19 - GMT10FA Telect, Inc. • USA +1.509.926.6000 • Mexico +52.33.3836.37.52 www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 132152-4 A1 Page 20...
Need help?
Do you have a question about the GMT Series and is the answer not in the manual?
Questions and answers