Safety Aspects Of Connections - Pace IPW8000 Installation Manual

Entry of objects and liquids
Never push objects of any kind into your set-top box through openings as they may
touch dangerous voltage points or short-out parts that could result in fire or electric
shock. Never spill liquid of any kind on your set-top box.
Placement and mounting
Do not place your set-top box on an unstable or uneven surface. Your set-top box may
fall, causing serious injury to a child or adult and serious damage to your set-top box. If
you mount your set-top box, for example to a wall or ceiling, follow the manufacturer's
instructions and use a mounting accessory recommended by the manufacturer. See
also item 11 in the "Important safety instructions".
Risk of fire or scorching
Never place open flame sources, such as lighted candles, on or adjacent to your set-
top box.
Replacement parts
When replacement parts are required, be sure that the service technician has used
replacement parts specified by the manufacturer or that have the same characteristics
as the original part. Unauthorized substitutions may result in fire, electric shock, or
other hazards. See also item 13 in the "Important safety instructions".
Safety check
Upon completion of any service or repairs to this product, the service technician must
perform safety checks to determine that your set-top box is in proper operating
condition. See also item 13 in the "Important safety instructions".
SAVE THIS INFORMATION FOR FUTURE REFERENCE

Safety aspects of connections

For full details about the rear panel connections, see "Connecting the Set-Top Box" on
page 13.
Connecting
Do not connect your set-top box (or any other equipment such as a TV or VCR) to the
power supply until you have properly connected all the other cables. Your set-top box
is designed for use only with the supplied power supply unit.
On the power supply unit there is a label that specifies the correct AC power supply
input for it. Do not connect the power supply unit to any supply other than this.
Always connect the 12 volt connector from the power supply unit to your set-top box
before you insert the AC power connector from the power supply unit into the wall AC
outlet.
7