Advertisement
Step 9: Attach the Thread Adapter with antenna to the Mounting Flange.
IMPORTANT: Rotate the cable counterclockwise while turning the Thread Adapter
clockwise. Make sure the cable turns freely and does not bind.
Step 10: Firm up the mounting screws, but do not over tighten.
Skip to "Completing the installation" on page 5.
Mounting Flange
Mounting
Gasket
SRA-40 antenna
Thread Adapter
Rubber O-ring
Knockouts (3@120
(USE ONLY ONE)
Knife-slit for
passage of cable
6" cable and connector
o
)
Advertisement
