Table of Contents
Advertisement
Troubleshooting
Symptom
Stiletto 10 does not
power on
Stiletto 10 displays:
Acquiring Signal
Audio starts and stops
No sound
The Stiletto 10 will not
start up or displays
ERROR
The Stiletto 10 does
not respond to the
Media Dial and other
buttons
[
]
Operation
Check the battery to be sure it is installed correctly.
Charge the battery.
The Stiletto 10 is searching for a satellite signal.
Check for obstacles over or around the satellite antenna.
Change your location to eliminate nearby obstacles such as build-
ings, overhangs, bridges, overpasses, etc.
The satellite signal is weak.
Check for obstacles over or around the satellite antenna.
Change your location to eliminate nearby obstacles such as build-
ings, overhangs, bridges, overpasses, etc.
Check that the ear buds or antenna headphones are plugged in
correctly and securely.
The software on the Stiletto 10 has been damaged. Connect the
Stiletto 10 to your PC computer using the USB cable, and use
the My Sirius Studio software to download new software to the
device. Follow the instructions included on the software CD-ROM.
The Stiletto is locked. Slide the
center position.
Slide and hold the
which will turn the Stiletto 10 off. Then slide the
switch down and release it.
If none of these solutions works, remove the battery, wait 10
seconds, replace the battery, and slide the
down and release it.
Solution
Power/Lock switch to the
Power/Lock switch down for 5 seconds
Power/Lock
Power/Lock switch
Advertisement
Table of Contents
