Convertible Antenna Cable Routing Procedure
Figure 8 shows how the antenna cable should be routed from the antenna to your
SIRIUS radio in a convertible.
1. Bring Cable from
Antenna Into Inside
of Trunk Lid
2. Tape Cable Along
Inside of Lid to
Hinge Strut
[
26
Installation
A
NTENNA
3. Tie Cable to Hinge Strut, Allowing
Slack for Lid to Open and Close.
Route Cable Into Cabin
Through Existing Wire
Channel.
]
6. Bring Cable Out To
SIRIUS Receiver
Location
Figure 8
5. Bring Cable out from
Trim and Route Under
Carpet to Dashboard
or Console.
4. Route Cable from Trunk
Under Interior Trim, into
Cabin and Towards Front
of Vehicle