Echo Pro Attachment Series Operator's Manual page 27

PAS-225
Note: If attachment moves, readjust carburetor according to
"Carburetor Adjustment" instructions in this manual or see
your ECHO Dealer.
1. Stop Switch
Move stop switch button (A)
forward away from the STOP
position.
2. Purge Bulb
Pump purge bulb (C) until fuel is
visible in the "Clear" fuel return
line. Pump bulb an additional 4
or 5 times.
3. Recoil Starter
Lay the unit on a flat area and
keep movable attachment parts
clear of all obstacles. Firmly grip
throttle handle and throttle
trigger lockout with left hand.
Rapidly pull recoil starter
handle/rope (D) until engine
fires.
Note: If engine does not start
after 5 pulls, use Cold
Start Procedure.
X7732274001
© 02/2019 ECHO Inc.
OPERATION
A
C
D
27