Kyocera Hydro Shore User Manual page 62

3.2M(2048x1536), or
3.6M(1920x1920)
 Flash to choose a flash setting (back
camera only). Select from Auto, ON,
or OFF.
 Self-timer to choose a timer setting.
Select from 10 seconds, 5 seconds,
2 seconds, or OFF.
 HDR* to combine multiple exposures
into a single image (back camera
only). Select ON or OFF.
 Image stabilization* to minimize the
effect of camera movement while
shooting. Select Auto, ON, or OFF.
 Touch shutter to take a picture by
tapping the screen. Select ON or
OFF.
 Smile shutter automatically detects
a smile on a face and shoots a smile
without touching the shutter button.
(back camera only). Select ON or
OFF.
*Note: The HDR and Image
stabilization settings are only available
when the camera is in the Manual mode.
● VIDEO
 Size to choose the default size for
videos. Select from
FullHD(1920x1080),
HD720p(1280x720), VGA(640x480),
QVGA(320x240), or QCIF(176x144).
62
 Light to choose a light setting (back
camera only). Select from Auto, ON,
or OFF.
 Image stabilization to minimize the
effect of camera movement while
recording. Select ON or OFF.
● GENERAL
 Switch camera to switch between
the back camera and the front
camera.
 EV compensation* to make
adjustments to exposure (back
camera only). Tap the slider bar to
increase or decrease the value.
 White balance* to set the white
balance (back camera only). Select
from Auto, Sunlight, Cloudy,
Fluorescent (White daylight),
Fluorescent (Daylight), or
Incandescence lamp.
 Focus* to choose areas of the
screen to focus on (back camera
only). Select from Face priority,
Center, Marco, or Infinity.
 Auto exposure* to adjust the
metering mode of pictures (back
camera only). Select from Frame
average, Center weighted, or Spot
metering.
 ISO speed* to set the ISO level
(back camera only). Select from
Auto, 100, 200, 400, or 800.
User Manual