Advertisement
FACTORY RESET - REMOTE
Remote - Press the
green flash) and then press and hold the
10 seconds
After this reset, the Lights and Remote are in Sleep mode. To reconnect them see To Reconnect
after Sleep Mode at the beginning of the guide.
TO CHANGE A BATTERY IN THE REMOTE
Carefully remove the four screws, noting how tight they are. Open the case, carefully push out the
existing battery and slide in the new. Ensure the PCB and gasket align with the corner feature.
Screw on the back to a similar tightness to that noted when unscrewing.
To reconnect to the light, press the
button rapidly 4 times, (flash Red to confirm). Press the
B
x 4
button.
A
button again for 10 seconds (one green flash to confirm).
A
button once (one
A
x 1
Advertisement
