Table of Contents
Advertisement
Networked Monitoring
PViQ Local Meter Overview
The PViQ Local Meter is a high precision meter capable of measuring true RMS current. The value of
line current per input phase and output circuit current is shown on an easy to read, 4-digit LED Display.
The display continuously scrolls through the different measured values. The Monitor also provides
access to measurement data and control values through a web page, SNMP, or XML. The PViQ
Networked Monitoring Instructions section of this document will give more detailed information on the
network operation and functionality of the unit.
PViQ Networked Monitoring Instructions
Setting an IP Address
The POU comes preset with an IP address for initial setup and access to the unit. The 'Configuration'
page contains the network properties. Access to the unit requires the IP address to be known, the IP
address may be manually reset should the user-configured address be forgotten. The default address is:
IP Address: 192.168.123.123
Subnet Mask: 255.255.255.0
Gateway: 192.168.123.1
First time setup:
1. Connect POU to your computer using a crossover cable.
2. On your computer, go to "Start > Settings > Control Panel > Network and Dial Up
Connections."
3. Right Click on "Local Area Connection" and select "Properties."
2
Actual configuration of circuits measured by the PViQ Monitor is POU model specific. Please contact
Panduit Technical Support with questions on measurement configuration of PViQ Monitoring Meters.
10
PViQ Monitoring Meter
Networked POU
2
Version 1.0
Advertisement
Table of Contents
