Setting Up A Deny Access List - Belkin Wireless G Plus MIMO Router F5D9230-4 User Manual

Using the Web-Based Advanced User Interface

Setting up a Deny Access List

The "Deny Access" list lets you specify computers that you DO NOT want to
access the network. Any computer in the list will not be allowed access to the
wireless network. All others will.
1.
Select the "Deny" radio button (1) to begin setting up a list of computers
to be denied access to the wireless network.
2.
Next, in the "MAC Address" field that is blank (2), type in the MAC
address of the wireless computer you want to deny access to the wireless
network, then click "<<Add" (3).
3.
Continue to do this until all of the computers you want to deny access to
have been entered.
4.
Click "Apply Changes" (4) to finish.
(1)
(2)
62
(3)
(4)