Configuring Router For Connection To Internet Service Provider - Belkin Wireless G Plus MIMO Router F5D9230-4 User Manual

Alternate Setup Method
Step 4: Step 4: Confi guring your Router for Connection to your Internet Confi guring your Router for Connection to your Internet
Service Provider (ISP)
The "Internet/WAN" tab is where you will set up your Router to connect to
your Internet Service Provider (ISP). The Router is capable of connecting to
virtually any ISP's system provided you have correctly configured the Router's
settings for your ISP's connection type. Your ISP connection settings are
provided to you by your ISP. To configure the Router with the settings that
your ISP gave you, click "Connection Type" (A) on the left side of the screen.
Select the connection type you use. If your ISP gave you DNS settings,
clicking "DNS" (B) allows you to enter DNS address entries for ISPs that
require specific settings. Clicking "MAC Address" (C) will let you clone your
computer's MAC address or type in a specific WAN MAC address, if required
by your ISP. When you have finished making settings, the "Internet Status"
indicator will read "connection OK" if your Router is set up properly.
(A)
(B)
(C)
34