Verbatim MediaShare Wireless Mini Quick Start Manual page 7

These folders will automatically be created on the inserted microSD card if it is not already
present.
Choose your fi le to access and it will open directly in your browser (if compatible) or else will
download to your device.
5
Use the fi le explorer to access any folder on the microSD card.
6
Access the system settings – change the wireless settings, change security settings, bridge
to another network, change password settings, check capacity of microSD card, etc...
7
Indicates if a network bridge is enabled.
Please download the user manual in order to obtain more details of these functions and all
other functions available.
VERBATIM LIMITED WARRANTY
Verbatim Limited warrants this product to be free from defects in material and workmanship for
a period of 2 years from date of purchase. This warranty excludes batteries. If this product is
found to be defective within the warranty period, it will be replaced at no cost to you. You may
return it with your original cash register receipt to the place of purchase or contact Verbatim.
Product replacement is your sole remedy under this warranty, and this warranty does not
apply to normal wear or to damage resulting from abnormal use, misuse, abuse, neglect or
accident, or to any incompatibility or poor performance due to the specifi c computer software or
hardware used. VERBATIM WILL NOT BE LIABLE FOR DATA LOSS OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES, HOWEVER CAUSED, FOR BREACH OF
WARRANTIES OR OTHERWISE. This warranty gives you specifi c legal rights and you may
also have other rights which vary from state to state or country to country.
FCC COMPLIANCE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT
This device complies with FCC SAR exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
8