Verbatim MediaShare Wireless Mini Quick Start Manual page 4

STEP 1
Charge the MediaShare™ Wireless Mini by connecting it to any powered USB port of a
computer or smartphone/tablet wall charger. (Full charge should be achieved after 2 hours )
While connected to a power source the mode switch on the side of the MediaShare™ Wireless
should be positioned away from
as a card reader/writer.
STEP 2
Insert microSD Card into slot.
STEP 3
Search for the "MediaShare™ Wireless Mini" app from your portable device's
App store, then download and install to your device.
STEP 4
Slide the mode switch on the side of the MediaShare™ Wireless Mini to
fl ash until wireless broadcasting is established.
STEP 5
Make sure that your computer's, tablet's or smartphone's Wi-Fi connection is enabled and
connect to your MediaShare™ Wireless Mini Wi-Fi connection called "Verbatim-XXXX" where
XXXX is the last 4 characters of the unique MAC (Media Access Control) address code of your
MediaShare™ Wireless Mini, when prompted for Wi-Fi security key, enter the default password
of "verbatim". This can be personalised later. See full user manual for details.
Windows and Mac users go to STEP 6B
STEP 6A
iOS and Android users :
Start the MediaShare™ Wireless Mini app on your portable device.
The fi rst time that you use the app on your smartphone or tablet the following login screen will
be displayed – default admin password is blank, just tap "OK"
Once the device is registered the home screen is displayed
. In this position the MediaShare™ Wireless Mini functions
5
Blue Wi-Fi LED will