Cambridge Audio AXR85 User Manual page 11

Repeatedly pressing the FM/AM button on the front of the unit switches between
FM and AM modes.
Note: For ease of tuning on first time use, we recommend that you set the
'Auto' mode. Press the Mode/Store button on the front of the unit. This button cycles
through Preset, Auto and Manual, modes.
AUTO
MODE / STORE
When Auto mode has been selected, press the  button to scroll down through
the station frequencies or press the  button to scroll up through the station
frequencies.
The tuner will stop at the first strong signal it finds. To move to another station
simply press the  or  button again.
SETTING PRESETS
Radio stations can be stored into the memory presets for easy access. You can store
up to 15 presets for each band (i.e. 15 presets for the AM band plus 15 presets for the
FM band).
Tune to the station you wish to store and hold down the Mode/Store button on the
front of the unit. The display on the unit will flash the next available preset.
01 87.50MHz
MODE / STORE
Press the Mode/Store button again to store the preset. The available preset will stop
flashing to indicate that the station has been stored.
To change the preset number, simply press and hold the Mode/Store button to enter
store mode then select any preset number you require with the  and  keys then
press the Mode/Store button again to actually save the preset.
To recall a stored preset, simply press the number on the remote control that
corresponds with the preset. Each of the preset buttons can select two presets. To
select the second preset on the button, press the button again and this will toggle to
the second preset.
1/5 2/6
To load a stored preset from the front of the unit, simply press the number on the
front the unit or remote that corresponds with the preset. To access the second
preset represented by the button, you must press and hold the button.
Note: You can only access stored presets 1-8 on the remote preset buttons. You can
access stored presets 1-10 on the front panel preset buttons. To access all presets, set
the mode to 'Preset' mode with the 'Mode' button on the remote control or 'Mode/
Store' button on the front panel, and use the  or  buttons. This will allow access
to the full 15 AM stored presets or 15 FM stored presets.
RESETTING TUNER PRESETS
To clear all stored presets for both AM and FM, press and hold both the 5/10 and
Menu buttons at the same time. The unit will display 'Reset'. Restart the unit by
powering off and on.
1 / 6 1 / 6 2 / 7 2 / 7 3 / 8 3 / 8
AXR
Presets
3/7 4/8
MENU
4 / 9 4 / 9 5 / 10
TUNER SETTINGS
It is possible to change the tuner region settings for this unit. This can be necessary
if the unit has been moved to a different country.
to
Two settings are possible which set the correct de-emphasis and tuning steps for
either North America or Europe/Rest of the world.
Note: Changing the tuner settings will clear all stored presets. When moving the unit
to another region the Voltage Select switch must be set to the correct mains supply
voltage by an authorized dealer.
1 / 6 1 / 6
Press and hold both the 4/9 and Menu buttons at the same time. The display will
show the software revision and followed by either a letter 'CU' which represents
North America or a letter 'EU' which represents Europe/Rest of the world. Restart
the unit by powering off and on.
AXR85
AXR100
MENU
2 / 7 2 / 7 3 / 8 3 / 8 4 / 9 5 / 10 5 / 10