LaserLiner CondenseSpot XP Manual page 22

12
Thermal bridge mode HEAT
In relation to buildings, the term thermal bridge refers to an area, e.g. an inside wall,
at which heat is transferred outwards faster than at the rest of the inside wall. When
For this purpose, the CondenseSpot XP compares the ambient temperature with the surface temperature.
Ambient temperature:
20°C
No thermal bridge
2-stage warning
Detect thermal bridge
13
Max/Min/AVG mode
22 EN
Ambient temperature:
20°C
Possible thermal bridge,
continue checking area
Ambient temperature:
20°C
acoustic signal
Sensitivity
„LOW" „MID"
± 2°C
± 4,5°C ± 6,5°C
lated again at the start of a new measurement or
Ambient temperature:
12°C
acoustic signal
„HI"
± 5°C
± 8,5°C