Inside Temperature Display; Reheat Option - Hispacold Ecomaster Comfort MH-083 Manual

When OFF is selected and the bus is shut down, the system will remember OFF in the next starting. For
the system to work in AUTO mode again, it is required to go to the Preheater display and choose AUTO. As
information to the driver that OFF is selected, symbol

1.15. Inside temperature display.

By pressing key (10) the real inside temperatures in the driver's and passengers' areas are displayed.
After a few seconds, the screen returns to the display shown before pressing key

1.16. Reheat option

When the system is in Climatization state, by pressing key
The following screen is displayed, in which Soft Demist is the preselected mode.
If not any key is pressed after few seconds, Soft Demist will be validated. It can also be validated by press-
ing the Demist key.
Bu pressing and
If, to enter to Demist, key
Once the chosen option is validated, one of the next two screens will be displayed.
MH-083 Ecomaster Comfort user manual
Inside temperatures screen
in the driver área, options HARD and OFF can be chosen.
is pressed for a while, HARD will be the preselected mode.
is displayed in both Auto and Manual modes.
, Demist function is displayed.
Manual
14/17
(10).