Summary of Contents for Hispacold Ecomaster Comfort MH-083
Page 1
Ecomaster Comfort user manual Reference: MH-083...
Page 2
Manual 2/17 MH-083 Ecomaster Comfort user manual Document privacy Redacted by: Pablo Garcia Piosa Date: 10-10-18 Public Category: Manual Restricted Confidential Revision control Version Date Change Comments 12-01-2016 Hispacold New document 10-10-2018 Pablo García New format...
Manual 3/17 MH-083 Ecomaster Comfort user manual Contents index Contents index ..............................3 1. Functional description ..........................4 1.1. Switching the driver climatization unit on and off..................5 1.2. Selecting the driver unit temperature....................... 6 1.3. Selecting the driver unit’s fan speed......................6 1.4.
Manual 4/17 MH-083 Ecomaster Comfort user manual 1. Functional description The fascia of the Ecomaster Comfort has three distinct control areas: Driver Climatization Unit functions Shared functions Passenger Climatization Unit functions When reference is made to climatization functions for the driver unit, the keypad is the one on this side and similarly for the passenger unit.
Manual 5/17 MH-083 Ecomaster Comfort user manual In these operating conditions, the automatic screen will be displayed indicating the outside temperature and the image of a bus with the selected temperatures for driver and passenger systems. In addition, the two LEDs located next to the keys (3),(15) will light up indicating automatic operation.
Manual 6/17 MH-083 Ecomaster Comfort user manual If the check detects an error, the error screen will be displayed (see section: Detection and Indication of Er- rors). It is possible to switch on the climatization system by pressing the (3) key, even though the engine is stopped, providing the ignition switch is on.
Manual 7/17 MH-083 Ecomaster Comfort user manual If it is set to Soft demist, the system will fix speed 3 and this speed can’t be manually changed. In the same way, if Hard demist is selected, the system will fix speed 5 and this speed can’t be man- ually changed.
Manual 8/17 MH-083 Ecomaster Comfort user manual 1.5. Adjusting the position of the driver unit floor/windscreen flaps. If the driver node is set to climatization, the position of the floor/windscreen flaps can be adjusted using the (7) key. When the position of the floor/windscreen vents is adjusted manually, the following display will appear on the screen: Air to driver’s feet Air to screen.
Manual 9/17 MH-083 Ecomaster Comfort user manual Screen with passenger climatization off 1.8. Adjusting the passenger unit selected temperature. To adjust the desired temperature in the passengers’ area, press keys (16) and (17). The selected temperature can be between 17ºC (63ºF) and 27ºC (82ºF). The upper passenger unit temperature limit is HI and in this position the heating will operate at maximum power continuously.
Manual 10/17 MH-083 Ecomaster Comfort user manual Passenger outside air screen. Passenger inside air screen. 1.11. Setting the passenger climatization unit to automatic. If the position of the passenger unit recirculation flaps or the speed of the evaporator fans are adjusted manually, or if the pre-heater, defroster or ECO mode are selected manually, the passenger climatization will switch to manual and the LED located next to key (15) will go off.
Manual 11/17 MH-083 Ecomaster Comfort user manual 1.13. Programming the clock. At any time, if you press down key (12) for 2 seconds, the screen changes to the clock programming function. Here the screen will appear as shown below, allowing the setting of the day of the week, hour and minutes. Day/time programming screen.
Page 12
Manual 12/17 MH-083 Ecomaster Comfort user manual The programs for a single day are erased once completed (they are set to OFF). Those for 7 days remain at AUTO for the following day. Once the day and time have been set, the program has to be activated. To do this you have to place the cursor over the “Activate”...
Manual 13/17 MH-083 Ecomaster Comfort user manual 1.14.2. Normal mode. In normal mode, the pre-heater either operates automatically as a support for the heating system or else manually during a time determined by the user. If you press key (8) for a short time you enter the pre-heater screen. In this screen, the flame symbol in- dicates if it is operating (flame filled in), whether in normal or programmed mode, or if it is switched off (hollow flame).
Manual 14/17 MH-083 Ecomaster Comfort user manual When OFF is selected and the bus is shut down, the system will remember OFF in the next starting. For the system to work in AUTO mode again, it is required to go to the Preheater display and choose AUTO. As information to the driver that OFF is selected, symbol is displayed in both Auto and Manual modes.
Manual 15/17 MH-083 Ecomaster Comfort user manual Screen Soft Demist. Screen Hard Demist. If before activating any of the Demist functions we were in manual mode, the display will show Auto mode and the Auto leds will be ON. Demist functions are considered as automatic modes of working. If Demist is chosen but driver is OFF, Demist will work and will activate the driver area.
Manual 16/17 MH-083 Ecomaster Comfort user manual 2. Autochecking. Error codes. When the system receives the signal from the battery cut-off (+30), it checks its outputs, to check which el- ements are switched on and if there is a short circuit. It also checks the state of the temperature sensors. While this check is made the screen looks like this: Initial check screen.
Page 17
Manual 17/17 MH-083 Ecomaster Comfort user manual Nº MESSAGE DESCRIPTION PCHN Short or Open circuit in the passenger's channel sensor Short or Open circuit in the water sensor (passenger) Short circuit at compressor output (passenger) Short circuit at recirculation pump output (passenger) Short circuit at ON/OFF evaporator output speed 2(passenger) Short circuit at ON/OFF evaporator output speed 1(passenger) Short circuit at stair heater blower output speed 1 (passenger)
Need help?
Do you have a question about the Ecomaster Comfort MH-083 and is the answer not in the manual?
Questions and answers