Daikin FTXN09KEVJU Service Manual page 31

Si041139
Step
5 Loosen the lock screw
and remove the fan
motor.
6 Pull out the fan motor
from the fan rotor.
Removal Procedure
Procedure
Lock screw
Fan motor
Fan motor
Removal of Fan Rotor / Fan Motor (Pattern 2)
When reassembling the fan
rotor, provide as much as
5 mm of play between the
side face of the rotor and the
bottom frame.
Side face of rotor
(R14544)
(1) Insert the fan motor with
approx. 5 mm left.
(2) Tighten the screw until it
stops. Then turn the screw
in one scroll.
(3) Move the fan rotor and
confirm the fan motor and
the fan rotor are installed
appropriately.
(4) Tighten the screw
completely if appropriate.
(5) If not appropriate, go back to
(1).
(R14543)
Points
Side face of
bottom frame
5 mm
(R2808)
(R9582)
29