Advertisement
SAFETY INSTRUCTIONS
IMPORTANT! WHEN USING ELECTRICAL TOOLS, THE
FOLLOWING SAFETY INSTRUCTIONS SHOULD BE OBSERVED
TO PREVENT THE RISK OF ELECTRIC SHOCK, PERSONAL
INJURY AND FIRE. READ AND OBSERVE THESE
INSTRUCTIONS CAREFULLY BEFORE USING THE TOOL.
1. Keep work area clean Cluttered and benches invite injuries.
2. Consider work area environment. Do not expose power tools
to rain. Do not use power tools in damp or wet locations. Keep
work area well lit. Do not use power tools near flammable liquids
or gases.
3. Guard against electric shock. Prevent body contact with
grounded surfaces(e.g. pipes, radiators, ranges, refrigerators,
etc.).
4. Keep children away Do not let visitors contact tool or extension
cord. All visitors should be kept away from work area.
5. Store ideal tools. When not in use, tools should be stores in a
dry, high, or locked-up place, out of the reach of children.
6. Do not force tool. It will do a better job and operate more safely
at the rate for which it was intended.
7. Use right tool Do not force small tools or attachments to do the
job of a heavy duty tool. Do not use tools for other than their
intended purpose; for example, do not use a circular saw for
cutting tree limbs or logs.
8. Dress properly. Do not wear loose clothing or jewelry. They can
be caught in moving parts. Rubber gloves and non-skid footwear
is recommended when working outdoor. Wear protective hair
covering to contain hair.
9. Use safety glasses. Also use a dust mask during operations
and wear ear protection. If the noise level. Exceeds 70dB(A), ear
protection is obligatory. Indicated noise levels may be exceeded
dependent on the working environment and the material to be
treated.
10. Use dust extraction. If dust extraction and collection devices
are present on the tool, make sure that they will be used
properly.
11. Do not abuse cord. Never carry tool by cord or yank it to
disconnect it from wall outlet. Keep cord from heat, oil and sharp
edges.
12. Secure work. Use clamps or a vise to hold the workpiece. It is
safer and it frees both hands to operate tool.
13. Do not overreach. Keep proper footing and balance at all times.
14. Maintain tools with care. Keep tools sharp and clean for better
and safe performance. Follow instructions for lubricating and
changing accessories. Inspect tool periodically and, if damaged,
2
Advertisement
