Installing And Setting Up The Card; Step 1 Install - Belkin N1 User Manual

Installing and Setting up the Card

Installing and Setting up the Card
Step 1 Install
IMPORTANT:
Install the software before inserting the Card.
1.1
Insert the Installation Software CD into your CD-ROM drive.
1.2
1.2 The Belkin Wireless Card Installer screen will automatically appear.
(This may take 15–20 seconds.) Click "Install Software" or "Next"
to start the installation.
Note:
If the Belkin Wireless Card Installer screen does not appear within 20
seconds, access your CD-ROM by double-clicking on the "My Computer"
icon; then double-click on the CD-ROM drive into which the installation CD
has been placed. Double-click on the icon named "Setup.exe".
1.3
The InstallShield Wizard will now
start. Click "Next" to continue.
8 8