Advertisement
Quick Links
The Lear Car2U™ System
The Lear Car2U™ System is a universal transmitter that includes two primary
features – a garage door opener and a platform for remote activation of devices
within the home. The Car2U System's garage door opener function replaces the
common hand-held garage door opener with a three-button transmitter that is
integrated into the interior of your vehicle. After being programmed for garage
doors, the Car2U System transmitter can be programmed to operate security
devices and home lighting systems.
Additional Lear Car2U System information can be found online at
www.learcar2U.com
2728.
Types of Garage Door Openers (Rolling Code and Fixed Code)
The Lear Car2U System may be programmed to operate rolling code and fixed code
garage door openers.
x
Rolling code garage door openers were produced after 1996 and are code
protected. Rolling code means the coded signal is changed every time your
remote control garage door opener is used.
x
Fixed code garage door openers were produced prior to 1996. Fixed code
uses the same coded signal every time. It is manually programmed by
setting DIP switches for a unique personal code.
To see if your hand-held transmitter is rolling or fixed code, open the battery cover.
If your garage door transmitter does not have switches (shown below) following the
rolling code instructions.
Lear Car2U System Owner's Guide
Lear Car2U™ Home Automation System
or by calling the toll-free Car2U System help line at 866-572-
Page 1
Advertisement
Related Manuals for Lear Car2U
Summary of Contents for Lear Car2U
- Page 1 2728. Types of Garage Door Openers (Rolling Code and Fixed Code) The Lear Car2U System may be programmed to operate rolling code and fixed code garage door openers. Rolling code garage door openers were produced after 1996 and are code protected.
- Page 2 7. CAUTION Do not use the Lear Car2U System with any garage door opener that does not have a “stop and reverse” feature. This includes any garage door opener model manufactured before April 1, 1982.
- Page 3 Retain the original transmitter for use in other vehicles as well as for future programming procedures (i.e. new Car2U System-equipped vehicle purchase) ƒ Upon the sale of the vehicle, it is recommended that the programmed Car2U System buttons should be erased for security reasons (refer to “Erasing the Lear Car2U System buttons”) ƒ...
- Page 4 Car2U System help line at 866-572-2728. 3. Return to your vehicle. Press and hold the Car2U System button you would like to use to control the garage door. You may need to hold the button from 5- 20 seconds, during which time the selected button indicator light will blink slowly.
- Page 5 After successful programming, you will be able to operate your Car2U System by pressing the button you programmed to activate the opener. The indicator light above the selected button will turn on to confirm that the Car2U System is responding to the button command.
- Page 6 NOTE: The Car2U Home Automation System allows for three devices to be programmed. If you need to change or replace any of the 3 devices after it has been initially programmed, it is necessary to erase the current settings using the “Erasing the Car2U System buttons”...
- Page 7 When a switch is in the Down, -, or off position circle “right.” 3. To input these positions into the Car2U System, simultaneously press all 3 Car2U System buttons for a few seconds and then release to put the device into programming mode. The indicator lights will blink slowly. Within 2.5...
- Page 8 Lear Car2U™ Home Automation System 5. Press and hold the Car2U System button you would like to use to control the garage door. Immediately (within 1 second) release the button once the garage door moves. During this time the selected button indicator light will blink slowly.
- Page 9 2. Once the indicator lights begin to blink, RELEASE your fingers from the buttons. The codes for all buttons are erased. If you sell your vehicle equipped with the Car2U System, it is recommended that you erase the programming for security reasons.
- Page 10 Lear Car2U™ Home Automation System FCC and RSS-210 Industry Canada Compliance If your vehicle is equipped with a Lear Car2U™ System transmitter, it complies with Part 15 of the FCC Rules. Operation is subject to two following conditions: 1. This device may not cause harmful interference 2.