Blueant T2 ENDURE User Manual page 11

13
When you pair your phone the T2 attempts to transfer the contacts
from your phonebook so that it can announce the names of incoming
callers.
nload and
Note:
d you will
must
BlueAnt
13a
above.
On Android devices a message about the
phonebook transfer may appear in the
notifi cations area at the top of the screen.
In order to transfer your contacts you must
swipe your fi nger over this message and
accept the phonebook transfer request from
the T2.
If you miss this step you will need to:
1. Delete the T2 pairing from your phone.
2. Power the phone off and back on.
3. Reset your T2 and pair it with your phone again.
t to its
This is due to the way the Android PBAP request system works.
T2_User_Guide_EN.indd 11
Phonebook Troubleshooting
If your phone prompts you to allow a connection to the T2, you
select "YES" or "OK".
Android™
Phonebook Access Request
Notifi cation
shown on
Android
devices
2/2/2012 7:19:42 PM