Shift Change; Hold Buffers; Reports - Vectron POS VARIO User Manual

12 . 2 . 6 . S h if t
Shift change means that a guest check is transferred to
another operator (e.g. change of shift). Open the guest
check that is to be transferred. Enter the number of the
operator to whom the guest check is to be transferred and
press <Shift change> or
12 . 2 .7. H o l d b u f fe r s
To open a hold buffer press the respective key. By means
of the hold buffer keys you can switch between the indivi-
dual hold buffers. To close a hold buffer press a media key.
Depending on the programming of the POS system a hold
buffer is automatically assigned to a certain operator. In
this case the hold buffer change is automatically carried
out if a new operator signs in.
12 . 3 . Re p o r t s
The Vectron POS System offers numerous possibilities
to combine the bookings of a certain period or clerk in a
report. You can select all reports via the <Mode> key or <M>
or via special keys and print them afterwards.
It is also possible to read reports by means of the PC
program Vectron Commander and to process them on the
computer.
It depends on the programming and on the operators'
authorization which reports can be called. Please contact
your Vectron dealer.
Note
ch a n g e
.
171