12 . 2 . 4 . G U Es T Ch E Ck S P L I T; Guest Check Move - Vectron POS VARIO User Manual

V e C T rOn P O S H a rdwa re

12 . 2 . 4 . G u es t ch e ck s p l i t

It may often be necessary to split the guest check, if for
instance one guest wants to leave earlier than the others.
For these cases you have the function "G.C. Split". This
function is only available for operators who have been ves-
ted with the according authorization.
To split a G.C., it must be opened again. If necessary close
the GC and open it again. Press the <GC split> key or
lect the PLUs to be split via the direct PLU keys or via PLU
numbers. Having selected all PLUs close with <Cash> or
or another media key. The invoice is printed.
It may also happen that a guest changes the table. You can
then split PLUs from one GC to another.
Proceed as described above but before pressing the key
<GC split> or
PLUs are to be transferred. Close with <GC> key or
12 . 2 . 5 .
Rather than splitting single PLUs from one check to ano-
ther, "Check Move" allows the entire check to be moved to
another guest check. The operators must be vested with
the according authorization.
•
•
170
enter the number of the GC to which the
G u es t ch e ck m ove
Open the G.C. to be moved. If the G.C. has already been
opened, close it with <G.C.> or
GC no. and <GC> key or
ried out if the G.C. is opened anew.
Enter the target guest check number and
move> key or
is automatically closed.
. G.C. moves can only be car-
. The guest check that has been moved
and open it again via
close with <GC
. Se-
.