Jacob Jensen Multi Sensor User Manual page 15

UK
JACOB JENSEN Multi Sensor
TM
Congratulations with your new JACOB JENSEN
Sensor.
The sensor is designed in Denmark by Jacob Jensen,
whose products have gained international recognition for
their original, simple and classic design. Jacob Jensen has
received around 100 prizes from around the world and has
19 products included in The Design Study Collection and
The Design Collection of The Museum of Modern Art in
New York.
One Multi Sensor supports more products from the JACOB
JENSEN Weather Station II series, among others: JACOB
TM
JENSEN Thermometer II Silver Version and JACOB JENSEN
TM
Hygrometer II Silver Version. Up to three sensors can be
connected to each product as there are three channels
available. No wiring is required between the sensor(s) and
the product(s).
Description .of .the .multi .sensor
Front .view .
1. Indicates AM / PM
(only in UK time mode)
2. Radio controlled clock
reception icon
.
4.
5. Clock
Multi
TM
6. Temperature / Humidity
Back .view .
1. RESET: Reset the unit to the
default settings
2. SEARCH: Disable / enable the
radio control signal
. °C / °F button
(EU version: °C / US version: °F)
4. Battery compartment
5. EU / UK switch
(radio controlled clock)
6. Channel switch
TM
To .set .up .the .multi .sensor
1. Unscrew the four screws
securing the battery cover and
insert the battery matching
the poles (+/-).
On initial set-up, simply
remove the plastic strip in
the battery compartment.
2. Select a channel and press RESET.
. Replace the battery cover and tighten the four screws.
4. Place the sensor and make sure that the signal is
transmitted and received without interference.
Indicates which channel has been set
Sensor battery low
15