Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hilti DC-EX 125/5inch M
Summary of Contents for Hilti DC-EX 125/5inch M
- Page 1 DC-EX 125/5"M English Printed: 08.06.2018 | Doc-Nr: PUB / 5128910 / 000 / 02...
- Page 2 Printed: 08.06.2018 | Doc-Nr: PUB / 5128910 / 000 / 02...
-
Page 3: Information About The Documentation
Information about the documentation About this documentation • Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and use of the product. • Observe the safety instructions and warnings in this documentation and on the product. •... - Page 4 ▶ Use respiratory protection to keep residual dust away from the face and airways when working. ▶ Even when the hood is fitted, always use the side handle of the approved Hilti power tool. ▶ Wear protective gloves when changing the accessory tool.
- Page 5 Description Product overview Connector Catch & Locking catch Carriage plate Front clip Wheels Carriage plate with cutting line indicator Cover English Printed: 08.06.2018 | Doc-Nr: PUB / 5128910 / 000 / 02...
-
Page 6: Technical Data
The DCEX 125/ 5" M slitting hood is for cutting and slitting mineral materials, particularly masonry, with 125 mm / 5" discs in combination with a Hilti dust extractor. Use the DCEX 125/ 5" M slitting hood only for the AG 500 11S, AG500 13D, AG 125-13S and AG 125-19SE angle grinders and only without water. -
Page 7: Before Use
Before use Fitting the hood 1. Fit the guard on to the arbor collar so that the two triangular marks on the guard and on the power tool are in alignment. 2. To bring the hood to the desired working position, pivot the device radially while pressing the catch on the angle grinder. - Page 8 1. Remove the clamping flange for the arbor. 2. Screw the adapter on to the arbor and tighten it securely. 3. Insert a diamond cutting disc, observing the specified direction of rotation. 4. Fit the spacer rings for the desired width between slits. 5.
-
Page 9: Operation
3. Guide the cutting disc into the work. You can disable the plunge function with the locking screw. Fitting the side handle ▶ Fit the side handle on the desired side. Operation Wall and corner accessibility 1. Press the locking catch. 2. -
Page 10: Manufacturer's Warranty
8. Turn the hood radially until it can be removed from the tool. Breaking out the fillet ▶ Break out the fillet. Manufacturer’s warranty ▶ Please contact your local Hilti representative if you have questions about the warranty conditions. English Printed: 08.06.2018 | Doc-Nr: PUB / 5128910 / 000 / 02... - Page 11 Printed: 08.06.2018 | Doc-Nr: PUB / 5128910 / 000 / 02...
- Page 12 Hilti = registered trademark of Hilti Corp., Schaan 20180607 Printed: 08.06.2018 | Doc-Nr: PUB / 5128910 / 000 / 02...