Basics; Getting Started; Select The Display Language - Kenwood KDC-BT730DAB Instruction Manual

BASICS

Faceplate
Volume knob
Detach button
Attach Detach
To
Turn on the power
Adjust the volume
Select a source
Change the display information
Loading slot Display window
Lights up when Bluetooth connection
is established. (Page 14)
How to reset
Reset the unit within
5 seconds after
detaching the faceplate.
On the faceplate
Press B SRC.
• Press and hold to turn off the power.
Turn the volume knob.
Press B SRC repeatedly.
Press DISP repeatedly. (Page 28)

GETTING STARTED

1
Select the display language and cancel the
demonstration
When you turn on the power for the first time (or [FACTORY
RESET] is set to [YES], see page 5), the display shows:
"SEL LANGUAGE" "PRESS" "VOLUME KNOB"
1
Turn the volume knob to select [EN] (English),
[RU] (Russian), [SP] (Spanish) or [FR] (French), then press
the knob.
[EN] is selected for the initial setup.
Then, the display shows: "CANCEL DEMO"
"VOLUME KNOB".
2
Press the volume knob again.
[YES] is selected for the initial setup.
3
Press the volume knob again.
"DEMO OFF" appears.
Then, the display shows the selected crossover type: "2-WAY
X ' OVER" or "3-WAY X ' OVER".
• To change the crossover type, see "Change the crossover
type" on page 5.
"PRESS"
3
ENGLISH