Troubleshooting; General - LG M2250D Owner's Manual

70

TROUBLESHOOTING

TROUBLESHOOTING

General

The operation does not work normally.
Problem
The remote control doesn't work
Power is suddenly turned off
The video function does not work.
Problem
No picture & No sound
Picture appears slowly after
switching on
No Colour, poor colour, or poor
picture
Horizontal / vertical bars or picture
shaking
Poor reception on some channels
Lines or streaks in pictures
y Check to see if there is any object between the product and the
remote control causing obstruction. Ensure you are pointing the
remote control
y Ensure that the batteries are installed with correct polarity (
to ).
y Ensure that the correct remote operating mode is set: TV, VCR, etc.
y Install new batteries.
y Is the sleep timer set?
y Check the power control settings. Power interrupted.
y If the TV is switched on and there is no input signal, it will switch off
automatically after 15 minutes to save the power consumption.
y When a broken file was played in the USB mode, the TV may turn off.
Please check the file in your usb storage.
y Except the screen off mode of the energy saving menu.
y Check whether the product is turned on.
y Try another channel. The problem may be with the broadcast.
y Is the power cord inserted into wall power outlet?
y Check your antenna direction and/or location.
y Test the wall power outlet, plug another product's power cord into the
outlet where the product's power cord was plugged in.
y This is normal, the image is muted during the product startup
process. Please contact your service centre, if the picture has not
appeared after five minutes.
y Adjust Colour in menu option.
y Keep a sufficient distance between the product and the VCR.
y Try another channel. The problem may be with the broadcast.
y Are the video cables installed properly?
y Activate any function to restore the brightness of the picture.
y Check for local interference such as an electrical appliance or power
tool.
y Station or cable product experiencing problems, tune to another
station.
y Station signal is weak, reorient antenna to receive weaker station.
y Check for sources of possible interference.
y Check antenna (Change the direction of the antenna).
Resolution
Resolution
to ,